Террейн — Насосная цистерна

Террейн для игры Warhammer 40000. Индустриальный сектор Империи.

Материал: Стакан от пюре, кусочек пвх трубки для проводки, картонка и мелкий хлам. Склеено на «Момент». Натуральный песок на пва.

IMG_4659Покрашено аэрографом и кисточкой. Краска акрил белая + черная, просроченная цитадель leather, немного зелёной и жидко разведённая черная акриловая грунтовка.

Результат:

IMG_4663

Mark IV tank by Baccus 6mm

Last year, we celebrated the 100th anniversary of the end of the World War 1, the conflict with vague causes and numerous victims. In addition to many other new weaponry, this war was remembered by the first appearance of tanks. The first to create them and massively applied was Britain, with the rhombic tank «Mark I». It is a clumsy design by modern standards, the main weapons — two 57mm guns in the side sponsons. The improved version was the «Mark IV» model.

british-mark-iv-tank-of-wwi-first-used-in-august-1917-and-served-in-the-battles-of-messines_a-g-12145744-4990879

And now about the model. The company produces it «Baccus 6mm», which specializes in miniature on a 6mm scale. They produce a very wide range of time periods and countries. In addition to the figures of soldiers, they began to produce vehicle models. And one of the first vehicle models is the model of «Mark IV male» tank. The test prototype was modeled by me and after revision became available in the Baccus store.

Link to «Baccus 6mm» WW1 British armor section:

https://www.baccus6mm.com/catalogue/GreatWar/BritishVehicles/

mark_iv_baccus

Here are photos of the models I received. As you can see, this is a traditional solder casting technology (usually tin and lead). Detailing turned out better than other 6mm models that I saw. On the model were tiny potholes that disappeared after putty and painting. The rest was without problems.

mark_iv_

mark_iv__

This model is slightly larger than regular 6mm scale models (1/285). The manufacturer stated that they are 1/240.

If you need exactly 1/285 scale, the same model is available in my Shapeways section.
http://shpws.me/DDdk

Different tank models and scales also available.
These model version is 3d printed with photopolymer material.

Freakazoitt

#6mm, #baccus, #tank, #ww1

Buggy modelling. Part 1

Technolog has a great model — Robogear «Hunter» buggy. It is cheap and has an interesting design.

As a base for 40k vehicles conversions, it’s a good option and the results can be found on the Internet.

But her scale is not very convenient 1/48. Also, I want to modify its design by adding my own elements. Such as cabin armor elements, weapon mounts and 28mm scale driving place,
I do not cast in resin. I make 3d models and then print it (I don’t have my 3d printer though). Therefore, I had to first copy the buggy model to use it as a base template for creating new compatible parts.
And what I did is:

Yes, it looks like original model. It’s almost same size. But I slightly altered the design (could not resist). And so it turned out an independent model.
It is worth saying that this is not the first attempt at modeling the buggy. Before, on the Tehnolog forum, I was offered to create an alternative to their  buggy (missile launcher vehicle). However, my ideas didn’t look very nice and practical. Perhaps, starting from the original design will turn out better.
File can be downloaded here: https://www.thingiverse.com/thing:2314616

Trying to make 6×6 chassis for heavier weaponry… ugly

I did not do this project for a while (for years?), then decided to try to alter the front end:

And result was much better. But. It’s longer and capable to carry same weapons (I want bigger weapons). Also, I wanted to add second crew member — a gunner. And there is no place for him.
Looks nice, anyway:

What’s next?
I still have to complete modelling original Tehnolog design for creating conversion parts. And I want to finish designing heavier version with missile launcher. Maybe, there also will be orcish style designs and Elysian Tauros style design. Above all, there are ideas for creating a vehicle constructor with uniform chassis patterns  to make it all compatible each other.


Freakazoitt

 

#3d-print, #buggy, #tehnolog

Alternative bits for Eldar miniatures

Looking for an alternative to 40k Eldar bits? They are here.
Frosted Detail quality 3d printing material and some models present in durable Acrylic material.
Shapeways print-on-demand service will produce and ship it anywhere.
I present to your attention some examples from Forpost D6 shop:

28mm space elf biker heads

Link

 

28mm Space elf guard head

Link

 

28mm Space elf blasters (10)

Link

 

28mm Space Elf shadow spear guns

Link

 

28mm Space Elf stub rifles

Link

 

Find more bits here!

Write down what bits you need. Perhaps we will do this and add it to the assortment.

#40k, #shapeways-2, #warhammer-2

Forpost D6 — Shapeways miniatures catalog

Last update: 11 Feb 2018

6mm-15mm wargame tanks

Name Period 1/285 1/220 1/160 1/144 1/100
 Renault FT  WW1 1/285  1/220  1/160  1/144  1/100
 Schneider CA1  WW1 1/285  1/220  1/160  1/144  1/100
 Saint Chamond  WW1 1/285  1/220  1/160  1/144  1/100
 Whippett Mk.A  WW1 1/285  1/220  1/160  1/144  1/100
 Male Mk.I  WW1 1/285  1/220  1/160  1/144  1/100
 Female Mk.I  WW1 1/285  1/220  1/160  1/144  1/100
 Male Mk.IV  WW1 1/285  1/220  1/160  1/144  1/100
 Female Mk.IV  WW1 1/285 1/220 1/160 1/144  1/100
 Male Mk.V Rails  WW1 1/285  1/220  1/160  1/144  1/100
 Female Mk.V Rails  WW1 1/285  1/220  1/160  1/144  1/100
 Female Mk.V Star WW1 1/285  1/220  1/160  1/144  1/100
 A7V Panzer  WW1 1/285  1/220  1/160  1/144  1/100
 Austin arm.car  WW1 1/285  1/220  1/160  1/144  1/100
 Christie T3 tank InterW 1/285 1/220 1/160 1/144 1/100
 BT-2 fast tank InterW 1/285 1/220 1/160 1/144 1/100
 BT-5 fast tank InterW 1/285 1/220 1/160 1/144 1/100
 T-34 tank  WW2 1/285  1/220  1/160  1/144  1/100
 T-34/85 tank  WW2 1/285  1/220  1/160  1/144  1/100
 BT-7 fast tank  WW2 1/285  1/220  1/160  1/144  1/100
 T-26 tank  WW2 1/285  1/220  1/160  1/144  1/100
 T-60 light tank  WW2 1/285  1/220  1/160  1/144  1/100
 T-70 light tank  WW2 1/285  1/220  1/160  1/144  1/100
 BA-64 arm. car  WW2 1/285  1/220  1/160  1/144  1/100
 KV-1 heavy tank  WW2 1/285  1/220  1/160  1/144  1/100
 KV-2 siege tank  WW2 1/285  1/220  1/160  1/144  1/100
 IS-2 heavy tank  WW2 1/285  1/220  1/160  1/144  1/100
 SU-76 sp-gun  WW2 1/285  1/220  1/160  1/144  1/100
 SU-122 sp-gun  WW2 1/285  1/220  1/160  1/144  1/100
 SU-85 sp-gun  WW2 1/285  1/220  1/160  1/144  1/100
 SU-100 sp-gun  WW2 1/285  1/220  1/160  1/144  1/100
 SU-152 Beast Killer  WW2 1/285  1/220  1/160  1/144  1/100
 ISU-152 Beast Killer  WW2 1/285  1/220  1/160  1/144  1/100
 Pz.38(t) light tank  WW2 1/285  1/220  1/160  1/144  1/100
 Pz.V Panther tank  WW2 1/285 1/220 1/160 1/144 1/100
 Hetzer tank hunter  WW2 1/285  1/220  1/160  1/144  1/100
Jg.Pz.V Jagdpanther WW2 1/285 1/220 1/160 1/144 1/100
 Ha-Go 95 tank  WW2 1/285 1/220 1/160 1/144 1/100
 E-100 heavy tank  (WW2) 1/285  1/220  1/160  1/144  1/100
 T-55 medium tank  ColdW 1/285  1/220  1/160  1/144  1/100
 Centauro B1 AFV  Modern 1/285  1/220  1/160  1/144  1/100
 C1 Ariete MBT  Modern  1/285  1/220  1/160  1/144  1/100
 period 1/285  1/220  1/160  1/144  1/100

6mm-15mm Wargame transport

Name Period 1/285 1/220 1/160 1/144 1/100
GAZ-AA truck WW2 1/285 1/220 1/160 1/144 1/100
ZIS-5 truck WW2 1/285 1/220 1/160 1/144 1/100
ZIS-42 halftruck WW2 1/285 1/220 1/160 1/144 1/100
Studebacker truck WW2 1/285 1/220 1/160 1/144 1/100
Voroshilovets truck WW2 1/285 1/220 1/160 1/144 1/100
Ya-12 artlillery truck WW2 1/285 1/220 1/160 1/144 1/100
GAZ-63 truck 50s70s 1/285 1/220 1/160 1/144 1/100
GAZ-51 truck 50s70s 1/285 1/220 1/160 1/144 1/100
period 1/285 1/220 1/160 1/144 1/100

6mm-15mm Wargame artillery

Name Period 1/285 1/220 1/160 1/144 1/100
 6 pound Prussian 1754 gun 1700’s 1/285  1/220  1/160  1/144  1/100
 155mm De Bange cannon  WW1 1/285  1/220  1/160  1/144  1/100
 150mm sIG33 howitzer  WW2 1/285  1/220  1/160  1/144  1/100
 BM-13 Katyusha  WW2 1/285 1/220 1/160 1/144 1/100
1/285  1/220  1/160  1/144  1/100

Visit our Shapeways shop


*

#3d, #3d-printed, #catalog, #freakazoitt, #models, #scale, #sclae, #shapeways-2, #shop, #skald, #tanks-2, #vehicles, #wargame-miniatures

Правила для игр с миниатюрами «Chain Reaction»

Chain Reaction — это универсальная система от студии Two Hour Wargames (опять же, только привыкшие к шестичасовым — и более — посиделкам варгеймеры понимают всю эпатажность этого названия). Начиная с третьей редакции она стала бесплатной, бесплатны и некоторые дополнения к ней.

Cкачать правила бесплатно: http://www.twohourwargames.com/chrefive.html

ChainReaction 3.1- Final Version

Читать далее

#chain-reaction, #free-rules, #skirmish, #tabletop, #wargame

3d печать теперь готова конкурировать в 28 мм

Автор статьи: SandWyrm

Я говорил про 3D печать уже много времени, и теперь как многие другие, рад что мы достигли той точки, когда миниатюры 28мм, отпечатанные в 3D будут неотличимы от отлитых пластиковых или металлических моделей.

Хорошо… это время пришло. Не для домашних принтеров, ещё нет. Но в этой публикации я покажу, на что способны высококачественные принтеры. С кое-какими совместимыми с 40K/Necromunda отпечатками от Shapeways, которые взорвут вас.

После разговоров про iBox Nano несколько недель назад, Я просматривал каталог сервиса 3D печати Shapeways.

3D рендеры CAD файлов всегда выглядят хорошо. А как будет с распечатанными минями?

Читать далее

#28mm, #3d, #3d-printer, #gang-wars, #necromunda, #shapeways-2